Shipping Rates

For free agency after the 75 €. For MRW or Envialia to Pic-model approach. Free from the 36 € per correos.SOLO TO SPAIN Delivery: The price varies depending on the chosen agency. . Shipping in 24/48 hours except public holidays, agency Delivery in 2-10 days by post COD shipments. Reimbursement is subject to charge at least 1 €, and a maximum of 6% of purchase value. These agencies charge commissions the Pic-model NO In free freight shipments Pic-elect model agency at its discretion.

Suppliers

High Brightness LED There are no products.

Connect the LED directly to a DC voltage of 3 volts.
For use with higher voltages must connect the supplied resistance in series with the LED, to do this, proceed as explained below:
In any of the cables, cut a little below where it ends, shrink and re-cut about a centimeter cable.Pele both ends of the cable, which goes to the LED and the connector that goes to JR, meta the heat shrink on the end that goes to the LED. Now with the help of a soldering tin little power, if possible, solder the ends of the resistance to bare wire ends, lower the heat shrink to cover the welds and resistance and apply heat until the termoretractil this set .
This LED can be used in a wide voltage range and a maximum of 16 Vdc.

There are no products in this category.